ERIKC Bosch 0445120183 common rail injection system 0 445 120 183 vehicle fuel injector 0445 120 183 for DongFeng
injector detail
| Type: |
0445120183 Common Rail Injector Bosch |
| Model No: |
0445120183 , 0445 120 183 , 0 445 120 183 bico fuel injector |
| Other Injector Parts: |
0445 120 183 bico fuel pump injector |
| Application For Nozzle: |
DLLA150P2142 0433173142 Bosch Common Rail Nozzle |
| Suit For Valve: |
F 00R J02 472 Bosch Injector Valve Assy |
| Car Or Engine Type: |
Dong Feng |
| Net Weight: |
600g/pc |
| Gross Weight: |
650750g/pc |
| Packaging Details: |
Neutral packing , ERIKC packing available |
| Warranty: |
12 month |
| Lead Time / Delivery Time: |
Within 12 days after payment ,you can get goods within 612 day. |
| Stock: |
In stock, cannot be naked without packing in air for a long time. |
| Shipping Way: |
DHL, FedEx, UPS, TNT, EMS, ARAMEX, By Air. |
| Payment Terms: |
T/T, Western Union, MoneyGram, PayPal, Ect. |
| Current Export Market: |
South/North America, Europe, Mid East, Africa, Asia, Australia. |
injector picture
Other Hot product
Our company's main products :bosch denso delphi piezo common rail injector , valve , nozzle , pump , repair kit , Fuel metering valve , Solenoid valve ,injector nozzle tester , injector repair tool and shim copper oring other injector parts
Other products
Injector FAQ
FAQ: Analysis of Common Failures of Fuel Injection Pumps? Oil spill
ERIKC Answer:
(1) The oil pump leaks. If the clearance between the plunger and the plunger sleeve is too large, the fuel will leak into the camshaft chamber from the gap to dilute the oil, destroy the lubrication condition of the injection pump, and accelerate the wear of the components. In addition, low-pressure oil leakage can also occur between the pipe joint, the sleeve and the housing.
(2) Dripping of the fuel injector caused by the failure of the oil valve. Multiple cylinder engine individual cylinder fuel injectors have oil drop faults, which can be replaced by alternative methods for troubleshooting. That is, the “faulty cylinder” fuel injectors are installed on the “normal cylinder” fuel injection pump sub-pump. If oil drops still, the fault is in the spray. On the nozzle, if there is no drip, the fault is on the fuel injection pump. In order to find out the fault further, the camshaft of the cylinder fuel injection pump can be turned to the bottom dead center, so that the plunger sleeve oil inlet hole can be opened, and the high pressure oil pipe can be unscrewed and hand pump can be used to supply oil, because the oil supply pressure of the oil pump is low. At the opening pressure of the outlet valve, the tight seat of the outlet valve should be free from bubbles or diesel overflow. Otherwise, it indicates that the oil valve and the valve seat are not closed tightly. If the oil flow is large, it means that the oil valve is stuck in the open position; if the oil flow is small, it indicates that the decompression belt and the sealing taper face are seriously worn. For the No. II pump,
