ERIKC Bosch FOOVC01005 Injection Check Valve F OOV C01 005 Injector Needle Control Valve FOOV C01 005 for 0445110021

ERIKC Bosch FOOVC01005 Injection Check Valve F OOV C01 005 Injector Needle Control Valve FOOV C01 005 for 0445110021

Valve Introduction

bosch common rail original injector

Valve Picture

Other ERIKC Valve List

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).

Injector FAQ

FAQ: sensor voltage measurement

ERIKC Answer: Unplug the rail pressure sensor plug, measure the sensor side plug, the voltage between terminal 3 and ground should be 5V, the voltage between terminal 2 and ground should be about 5V, and the voltage between terminal 1 and ground is 0V. Connect the plug and the voltage between the three terminals is 5V, 0.5V, 0V.

FAQ: data flow detection

ERIKC Answer: Reading the engine system data stream with the diagnostic tool, there are 4 data streams involving the rail pressure: "fuel system rail pressure", "rail pressure setting value", "actual rail pressure maximum value", "rail pressure sensor output Voltage".

When the engine water temperature reaches 80°C and idling, the "rail pressure sensor output voltage" should be about 1V, and the "fuel system rail pressure" and "rail pressure setting value" should be about 25 Mpa, "rail pressure setting value". It is very close to the "fuel system rail pressure" value.

When the accelerator pedal is gradually depressed and the engine speed is increased, the above four data streams are gradually increased. The maximum values ​​of the “fuel system rail pressure”, “rail pressure setting value”, and “actual rail pressure maximum value” are 145 Mpa. The maximum value of the pressure sensor output voltage is 4.5V.