ERIKC F00VC01356 bosch piezo injector valve F 00V C01 356 injection sample control valve F00V C01 356 for 0445110307

ERIKC F00VC01356 bosch piezo injector valve F 00V C01 356 injection sample control valve F00V C01 356 for 0445110307

Valve Introduction

Valve Picture

Other ERIKC Valve List

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).

Injector FAQ

FAQ: What should I do if the high pressure pump fails? Oil metering unit over temperature

ERIKC Answer: Fault phenomenon:

1) The fault light is on; 2) The rail pressure relief valve opens and the vehicle enters the limp home mode.

Possible Causes:

1) Electric interference causes excessive burn-out of the fuel metering unit; 2) The internal fault of the fuel metering unit causes the chip to overheat.

Troubleshooting method:

1) Check the wiring harness or ECU corresponding control module; 2) Replace the flow measurement unit.

High-pressure pump failure, how to deal with? Short-circuit of fuel metering unit to ground and power supply

ERIKC Answer: Fault phenomenon:

1) The fault light is on; 2) The rail pressure relief valve opens and the vehicle enters the limp home mode.

Possible Causes:

1) The harness at the low end of the ECU to the fuel metering unit is shorted to a low or high level; 2) The fuel metering unit itself fails; 3) The ECU fails.