ERIKC FOORJ00375 bosch injection control valve F OOR J00 375 Cummins injector valves FOOR J00 375 for 0445120006

ERIKC FOORJ00375 bosch injection control valve F OOR J00 375 Cummins injector valves FOOR J00 375 for 0445120006

Valve Introduction

Valve Picture

Other ERIKC Valve List

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).

Injector FAQ

FAQ: Injector maintenance points. Check and adjust fuel injectors regularly?

ERIKC Answer:The injector should be checked and adjusted once every 700 hours of operation. If the opening pressure is lower than the specified value, the needle valve should be unloaded, put into clean diesel fuel, scrape the carbon deposit with wood chips or copper pieces, use a thin wire to clear the nozzle hole, and then reinstall it for debugging. It is required that the difference in injection pressure between cylinders on the same diesel engine must be less than lMPao

FAQ: Point of use and maintenance of the injector. Check and adjust the injection pump timing at regular intervals.

ERIKC Answer:In order to allow the fuel injected into the cylinder of the injector to be evenly mixed and completely combusted, it is necessary to periodically check and adjust the fuel injection advance angle. If the oil supply time is too early, diesel engine start will be difficult, there will be knocks, vibrations and other failures; if the oil supply time is too late, it will lead to exhaust pipe black smoke, excessive temperature and increased fuel consumption and other adverse consequences .