ERIKC F00RJ00375 Cummins injector control valve F 00R J00 375 bosch injection valves F00R J00 375 for 0445120006

ERIKC F00RJ00375 Cummins injector control valve F 00R J00 375 bosch injection valves F00R J00 375 for 0445120006

Valve Introduction

Valve Picture

Other ERIKC Valve List

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).

Injector FAQ

FAQ: Common causes of injector failures and remedy. Needle valve surface burnt or blue-black (diesel overheated)?

ERIKC Answer:Check the cooling system and take care to replace the coupling. The diesel engine should not be overloaded for long periods of time.

FAQ: Injector maintenance essentials. Improve the injector pad installation position?

ERIKC Answer:Since the metal is most likely to wear when working under high temperature conditions, the injectors of pintle and hole injectors extend into the combustion chamber, and most of the surfaces are in direct contact with the gas, subject to the baking of high temperature, high pressure gas. This is the main cause of the wear of the injector needle valve conical surface and the needle valve guide surface. For the pin-type injector, in order to avoid the whole gas-fired nozzle being baked, a copper gasket with an appropriate thickness can be installed at the injector head; for a hole-type injector, a v-shaped pad can be added. v The design of the mat should make the outer diameter as large as possible so that the inner hole can be as large as possible, so that it can be disassembled and prevented from invading when replacing the fuel injector.