ERIKC FOORJ01865 bosch nozzle injector valve FOOR J01 865 Injection Valve Sample F OOR J01 865 for 0445120098

ERIKC FOORJ01865 bosch nozzle injector valve FOOR J01 865 Injection Valve Sample F OOR J01 865 for 0445120098

Valve Introduction

Valve Picture

Other ERIKC Valve List

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).

Injector FAQ

FAQ: What are the reasons for black smoke?

ERIKC Answer: intake pressure sensor signal drift

Intake pressure sensor If the signal drifts, the ECU may receive more air than the actual air. At this time, the ECU will inject fuel according to the received signal. Actually, there is not so much air in the cylinder, which can easily cause incomplete combustion of the fuel. Black smoke. Common is the inlet pressure sensor itself failure, connector corrosion water, wiring harness connection and so on.

FAQ: What are the reasons for black smoke?

ERIKC Answer: Poor exhaust

The exhaust of the engine is not smooth and the exhaust resistance is increased. As a result, the exhaust gas cannot be discharged smoothly. Excess exhaust gas remains in the cylinder. The amount of fresh air is insufficient and the charging efficiency is reduced.

muffler, after treatment and other accessories on the exhaust pipe plug

FAQ: What are the reasons for black smoke?

ERIKC Answer: exhaust butterfly valve stuck

Exhaust pipe is blocked, it is easy to cause black smoke, especially when the heavy load is taken, usually with high exhaust temperature, red exhaust pipe, as shown below:

If you suspect that the exhaust is not smooth, you can disconnect the pressurized pipe after the exhaust pipe to test. If it is normal, it means that the pipeline after the exhaust pressure is blocked; if not, check the other.