Auto Engine Diesel Denso Cr Injector 6590 Denso Injector Nozzle 095000 6593

ERIKC Denso Injector Nozzle 6590 Fuel Inyector 095000-6593 (23670E0010) Auto Engine Diesel Cr Injector for Hino J08e-TM

^-^ ---------Injector Introduction

^-^ ---------Injector Picture

denso common rail direct injection injector

^-^ ---------ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand "HAOTENG" and "DYD", we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).
​

FAQ: What does the term static means?

ERIKC Answer: If an ERIKC injector stays on all the time, 100% duty cycle, it is said to be static. Injectors should never go static because control of fuel delivery is lost and this can cause catastrophic engine failure. Static injectors, or 100% IDC is normally an indication that the injector is too small for the engine. Injector duty cycle should usually not exceed 80%. Once 80% IDC is reached a bigger injector should be installed.

In some instances low fuel pressure or a failing fuel pump can cause injectors to become static. On the other hand, there are some injectors that will go static if the fuel pressure is too high.

FAQ: What is an Injector’s Static Flow rate?

ERIKC Answer: Manufacturers rate fuel injectors by the maximum amount of fuel that they can flow in a given amount of time at a given pressure. This measurement is known as Static Flow Rate and is normally taken at 100% duty cycle and a fuel pressure of 43.5 PSI.

Example: At 100% duty cycle a 55 pound (lb) injector at 43.5 PSI of fuel pressure will flow 55 pounds per hour.