ERIKC FOORJ03281 bosch fuel injection repair kit FOOR J03 281 Common Rail injector part F OOR J03 281 for 0445120393

ERIKC FOORJ03281 bosch fuel injection repair kit FOOR J03 281 Common Rail injector part F OOR J03 281 for 0445120393

Repair Kit description

Repair Kit Picture

Injector Repair Kit list 

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand "HAOTENG" and "DYD", we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).
​

Injector FAQ

FAQ: Why do I have a resistor pack in my car?

ERIKC Answer:There are quite a few aftermarket ECUs (although not all) that will be able to provide both saturated and peak and hold injector drivers. Make sure you set your ECU to match the type of injectors you purchased!

Why do I have a (injector) resistor pack (box) in my car?

ERIKC Answer:The resistor pack is installed to ‘fool’ your ECU into thinking it is driving high impedance injectors. Vehicles that have low impedance injectors AND resistor packs have ECUs that use a saturated signal to operate low impedance injectors.

You may know, or have read earlier in our FAQ How do I know if my injector is low impedance or high impedance? that low impedance injectors are designed to be driven by peak and hold signals. Most of the OE manufacturers that produced cars with low-Z injectors chose a “workaround” to using the low-Z injectors since it wasn’t cost effective to produce an ECU with the necessary circuitry and injector drivers to produce these P&H signals for the few high performance cars that needed it.

FAQ: What type of fuel can I use in my injector?

ERIKC Answer:Typically you can use just about any fuel in today’s injectors (see 2150cc exception below). While the injector will operate normally with just about any fuel, you do have to take some precautions with certain fuels.