ERIKC DLLA155P842 diese injection Nozzle DLLA 155 P 842 Oil Burner spray Nozzle DLLA 155P842 for 095000-6590 095000-6591

ERIKC DLLA155P842 diese injection Nozzle DLLA 155 P 842 Oil Burner spray Nozzle DLLA 155P842 for 095000-6590 095000-6591

^-^ ---------Nozzle Introduction

^-^ ---------Nozzle Picture

denso cr spare parts injector nozzle

^_^ ---- Other ERIKC Nozzle List

^-^ ---------ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand "HAOTENG" and "DYD", we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).

FAQ: Injector Storage.

ERIKC Answer: From time to time injectors need to be stored. Since corrosion is probably the injectors number one enemy it is important to make sure that injectors are cleaned properly and lubricated, inside and outside. Erikc. with a good quality lubricant. The injectors should then be placed in a sealed plastic bag or container and stored in a cool dry place.

FAQ: Cause of Fuel Injectors Going Bad When Not in Use?

ERIKC Answer:The cause of fuel injectors going bad when not in use is in part because large parts of America contain enough moisture to cause corrosion/rust damage. The internals of injectors are made of various steel alloys that will corrode and or rust when in the presence of moisture. Gum, varnish and other normal deposits can be removed by cleaning but once an injector dries out and the deposits hardened inside causing a pintle to get stuck to its seat, that injector will become inoperable and in most cases not possible to clean.